background image

EXERCISE COMPUTER

SPECIFICATIONS:

   

TIME-----------------------------------------------------------------00:00-99:59 MIN: SEC       
COUNT--------------------------------------------------------------0-9999 
CALORIE------------------------------------------------------------0.0-999.9 KCAL 
TOTAL-COUNT-----------------------------------------------------0-9999 
 

MODE BUTTON: 

Press and release the MODE button to select the desired specification display. Press and hold the 
MODE button for 3 seconds to reset TIME, COUNT, and CALORIES back to zero. The TOTAL 
COUNT cannot be reset unless you remove the batteries. 

FUNCTIONS: 

SCAN: 

Press “MODE" button to select Scan. This function will repeatedly and alternately display 

all specifications (in the following order). 

TM (TIME):

 Displays the total time elapsed in your current workout. 

CNT (COUNT):

 Automatically accumulates the total rowing counts of current workout. 

CAL (CALORIE):

 Number of calories burned during this workout.

T-CNT  (TOTAL  COUNT):

  Automatically  accumulates  the  

Battery:

 

Version 1.5

8

                                                                                                 total  count of  strokes  from  all  the 

workouts since the first workout

.

               The meter operates with two AAA batteries, which are included. If the display seems 

improper or becomes difficult to read, please try installing new batteries before contacting our 

customer service.

SCAN CNT

TM

CAL T-CNT

SCAN CNT

TM

CAL T-CNT

Summary of Contents for SF-RW1410











Reviews: