background image

 

 

IMPORTANT SAFETY INFORMATION 

 

We thank you for choosing our product. To ensure your safety and health, please use this 
equipment correctly. It is important to read this entire manual before assembling and using 
the equipment. Safe and effective use can only be assured if the equipment  is assembled, 
maintained,  and  used  properly.  It  is  your  responsibility  to  ensure  that  all  users  of  the 
equipment are informed of all warnings and precautions. 

 

1.  Before starting any exercise program you should consult your physician to determine if 

you  have  any  medical  or  physical  conditions  that  could  put  your  health  and  safety  at 
risk 

or  prevent  you  from  using  the  equipment  properly.  Your  physician’s  advice  is 

essential  if  you  are  taking  any  medication  that  may  affect  your  heart  rate,  blood 
pressure, or cholesterol level. 

2. 

Be  aware  of  your  body’s  signals.  Incorrect  or  excessive  exercise  can  damage  your 
health. Stop exercising if you experience any of the following symptoms: pain, tightness 
in  your  chest,  irregular  heartbeat,  shortness  of  breath,  lightheadedness,  dizziness,  or 
feelings  of  nausea.  If  you  do  experience  any  of  these  conditions,  you  should  consult 
your physician before continuing with your exercise program. 

3.  Keep children and pets away from the equipment. The equipment is designed for adult 

use only. 

4.  Use the equipment on a solid, flat level surface with a protective cover for your floor or 

carpet.  To  ensure  safety,  the  equipment  should  have  at  least  2  feet  of  free  space  all 
around it. 

5.  Ensure that all nuts and bolts  are securely tightened before using the equipment. The 

safety of  the equipment  can only be maintained if it is regularly examined for damage 
and/or wear and tear. 

6.  It is recommended that you lubricate all moving parts on a monthly basis.  
7.  Always  use  the  equipment  as  indicated.  If  you  find  any  defective  components  while 

assembling or checking the equipment, or if you hear any unusual noises coming from 
the equipment during exercise, stop 

using the equipment immediately and don’t use the 

equipment until the problem has been rectified. 

8.  Wear  suitable  clothing  while  using  the  equipment.  Avoid  wearing  loose  clothing  that 

may become entangled in the equipment. 

9.  Do not place fingers or objects into the moving parts of the equipment.  
10. The maximum weight capacity of this unit is 300 pounds. 
11. This equipment is not suitable for therapeutic use. 
12.  Move  with  caution  when  lifting  and  moving  the  equipment.  Always  use  proper  lifting 

technique and seek assistance if necessary. 

13. Your  product  is  intended  for  use  in  cool,  dry  conditions.    You  should  avoid  storage  in 

extreme  cold,  hot,  or  damp  areas  as  this  may  lead  to  corrosion  and  other  related 
problems. 

14. This equipment is designed for indoor use only!  It is not intended for commercial use! 

 

 
 

 

Summary of Contents for SF-RB4417













Reviews: