7
STEP: 2
IMPORTANT:
Before attempting to connect the
Tension Cable (No. 52B)
ensure that
the
Tension Control (No. 52A)
is turned all the way to the left (the lowest level of
resistance), this will provide the tension cable with the necessary length required to
connect it.
Connect the
Upper Sensor Wire (No. 10)
to the
Lower Sensor Wire (No. 58)
,
shown
above in
(Fig. 1)
. Ensure that the connection is properly secured before continuing.
Lower the
Tension Cable (No. 52B)
from the
Handlebar Post (No. 64)
and connect it
to the
Tension Wire (No. 57)
, following the tension cable assembly shown above in
(Fig. 2)
.
Attach the
Handlebar Post (No. 64)
to the
Main Frame (No. 59)
using 4
Screws (No.
53)
and 4
Arc Washers (No. 29)
, tighten and secure with
Allen Wrench S6 (No. 67)
.
FIG. 1
FIG. 2
#67
Please revise the
quality
and
clarity
of
the drawing for this
STEP
Please make this
drawing darker
Please
ensure that
all
numbers
for parts are
the same
font
and size
Please remove
the
Washer
from
the
Parts
shown
for this
Step
as
the
Washer
shown is
Part
(No. 29)
and
does not need to
be shown twice.
