8
ADJUSTMENTS & USAGE GUIDE
60
7
58
MOVING THE ELLIPTICAL
To move the elliptical, push down the
Middle
Handlebar (No. 7)
until the
Transportation Wheels
(No. 60)
on the
Front Stabilizer (No. 58)
touch the
ground. With the
Transportation Wheels (No. 60)
on
the ground, you can transport the elliptical to the desired
location with ease.
64
109
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you
must ensure that the elliptical is stabled and secured. If
you notice that the elliptical is unbalanced during use,
you should adjust both
Adjustable End Cap (No. 64)
and
Foot Pad (No. 109)
located beneath the front and
rear stabilizers. To do so, simply rotate both
Adjustable
End Cap (No. 64)
and
Foot Pad (No. 109)
until the
elliptical becomes levelled with the floor surface.
14
ADJUSTING THE RESISTANCE
Rotate
Tension Control Knob (No.14)
clockwise
to
increase the level of resistance, rotate the
Tension
Control Knob (No.14)
counter-clockwise
to decrease
the level of resistance. Level 1 is the lowest and level 8
is the highest.
CLEANING
The elliptical can be cleaned with a soft, clean, damp cloth. Do not use abrasives or solvents on
plastic parts. Please wipe your perspiration off the elliptical after each use. Be careful not to get
excessive moisture on the computer display panel as this might cause electrical hazard or
electronics to fail.
Please keep the elliptical, especially the computer, out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the elliptical for proper tightness every week.
STORAGE
Store the elliptical in a clean and dry environment, away from children.
Summary of Contents for E321003
Page 17: ......
