background image

IMPORTANT SAFETY INFORMATION 

 

We  thank  you  for  choosing  our  product.  To  ensure  your  safety  and  health,  please  use  this 
equipment correctly. It is important to read this entire manual before assembling and using the 
equipment.  Safe  and  effective  use  can  only  be  achieved  if  the  equipment  is  assembled, 
maintained and used properly. It is your responsibility to ensure that all users of the equipment 
are informed of all warnings and precautions. 
 

1.  Before starting any exercise program you should consult your physician to determine if you 

have any medical or physical conditions that could put your health and safety at risk, or 
prevent you from using the equipment properl

y. Your physician’s advice is essential if you 

are taking medication that affects your heart rate, blood pressure or cholesterol level. 

2. 

Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. 
Stop exercising if you experience any of the following symptoms: pain, tightness in your 
chest, irregular heartbeat, shortness of breath,  lightheadedness, dizziness or feelings of 
nausea. If you do experience any of these conditions, you should consult your physician 
before continuing with your exercise program. 

3.  Keep children and pets away from the equipment. The equipment is designed for adult use 

only. 

4.  Use  the  equipment  on  a  solid,  flat  level  surface  with  a protective  cover  for  your floor  or 

carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space 
all around it. 

5.  Ensure  that  all  nuts  and  bolts  are  securely  tightened  before  using  the  equipment.  The 

safety  of  the  equipment  can  only  be  maintained  if  it  is  regularly  examined  for  damage 
and/or wear and tear. 

6.  Always  use  the  equipment  as  indicated.  If  you  find  any  defective  components  while 

assembling or checking the equipment, or if you hear any unusual noises coming from the 
equipment  during  exercise,  stop  using  the  equipment  immediately  and  don’t  use  the 
equipment until the problem has been rectified. 

7.  Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may 

become entangled in the equipment. 

8.  Do not place fingers or objects into the moving parts of the equipment 
9.  The maximum weight capacity of this unit is 220 pounds (100 KG). 
10. The equipment is not suitable for therapeutic use. 
11. You must take care of yourself when lifting and moving the equipment. Always use proper 

lifting technique and seek assistance if necessary. 

12. Your  product  is  intended  for  use  in  cool,  dry  conditions.  You  should  avoid  storage  in 

extreme cold, hot or damp areas as this may lead to corrosion and other related problems. 

13. This equipment is designed for indoor and home use only! It is not intended for commercial 

use! 

 

 

 

WARNING

:  This  product  can  expose  you  to  one  or  more  chemicals  known  to  the 

State of California to cause cancer and birth defects or reproductive harm. For more 
information go to www.P65Warnings.ca.gov. 

Summary of Contents for SF-TD7704
















Reviews: