12
CENTERING THE RUNNING BELT
Place the treadmill on level ground and set it at 6-8 mph to check if the Running Belt
drifts.
If the belt drifts to the right, turn off the switch first, turn
the right adjusting bolt 1/4 turn clockwise, then turn the
left adjusting bolt 1/4 turn counter-clockwise until the
belt is centered. Refer to PIC
– A.
If the belt drifts to the left, turn off the switch first, turn the
left adjusting bolt 1/4 turn clockwise,
t
hen turn the right
adjusting bolt 1/4 turn counter-clockwise until the
belt is centered.. Refer to PIC
– B.
Over time, the belt will loosen. To tighten the belt, turn
both the left & right side adjustment bolts one full turn
clockwise. Check the tension of the belt. Continue this
process until belts is at the correct tension. Make sure to
adjust both sides equally to ensure even belt alignment.
Refer to PIC
– C.