background image

 

IMPORTANT SAFETY INSTRUCTION 

 

When using an electrical appliance, basic precautions should always be followed, including the 
following: 
 
Read all instructions before using this treadmill. 
 

DANGER

– To reduce the risk of electrical shock: 

1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. 

 

WARNING

 – To reduce the risk of burns, fire, electric shock, or injury to persons: 

1.  The treadmill should never be left unattended when plugged in. Unplug from outlet when not in use 

and before putting on or taking off parts. 

2.  Use this treadmill only for its intended use as described in this manual. Do not use attachments not 

recommended by the manufacturer. 

3.  Never operate this treadmill if it has a damaged cord or plug, if it is not working properly, if it has 

been dropped or damaged, or dropped into water. Return this treadmill to a service center for 
examination and repair. 

4.  Keep the cord away from heated surfaces. 
5.  Never operate the treadmill with the air openings blocked. Keep the air openings free of lint, hair, 

and alike items. 

6.  Never drop or insert any object into any opening. 
7.  Do not use outdoors. 
8.  Do not operate where aerosol (spray) products are being used or where oxygen is being 

administered. 

9.  To disconnect, turn the treadmill off, then remove plug from outlet. 
10. Connect this treadmill to a properly grounded outlet only. See grounding instructions. 
 
 

CAUTION

:

   

To avoid  injury, use extreme caution when stepping onto or off of a moving belt. Read instruction 
manual before using. 
 
 

SAVE THESE INSTRUCTIONS 

 

 
 
 
 

 

 
 

 

Summary of Contents for SF-T7942


























Reviews: