Sunny Health & Fitness SF-T1409M, User Manual

Page: 14 / 17

13
TROUBLESHOOTING
PROBLEM CAUSE CORRECTION
Base is unstable There is an object under
the Main Frame of the
treadmill or the ground isn’t
level. Remove the object
Move the treadmill to level
ground
The Lock Knob is loose Tighten the Lock Knob
Noise from moving parts Hardware; nuts bolts or
screws are loose Inspect hardware and
tighten.
Running Belt and Board are
not lubricated Lubricate Running Belt and
Board see (Pg. 13)
Running belt not centered Running belt tension not
Proper on the left or right
sides of the running board
Adjust the Allen Bolts; refer
to Maintenance (Pg. 12)
Centering the Running Belt.
The Monitor screen does
not display clearly. The batteries are worn out Replace the batteries with
new ones
The Monitor doesn’t work
at all. One of the following sensor
wires
isn’t connected
correctly. The Sensor Wire
(No.53) Lower Sensor Wire
(No. 52) or Upper Sensor
Wire (No. 51)
Check the connections of
the sensor wires, make
sure connects are proper
The Batteries are dead Replace with new batteries
There is no pulse display The Wires for the Hand
Pulse Sensors (No. 54) are
not properly connected Check the connections of
the wires, Hand Pulse
Wires (No. 55A) and (No.
55B)
Your hands are not making
proper contact with the
pulse sensors Ensure that both hands grip
the pulse sensors firmly.