10
EXERCISE COMPUTER
FUNCTION BUTTONS:
MODE:
This button lets you to select a function. The computer will be reset by
pressing the MODE button for 3~4 seconds except TOT. CNT (TOTAL COUNT).
SPECIFICATIONS:
CNT (COUNT)
------------------------------------------------------0~9999 TIMES
TMR (TIME)
---------------------------------------------------------00:00~99:59 MIN
CAL (CALORIES)
-------------------------------------------------0~9999 KCAL
TOT. CNT (TOTAL COUNT)
------------------------------------0~9999 TIMES
FUNCTIONS & OPERATIONS:
1. CNT (COUNT):
Automatically accumulates the count of steps taken during exercise. The computer counts 1
step after you step once with each foot.
2. TMR (TIME):
Counts the total time of an exercise from start to finish.
3. CAL (CALORIES):
Counts the number of total calories burned during an exercise from start to finish.
4. TOT. CNT (TOTAL COUNT):
Displays total counts of steps since the battery is installed. To reset TOT. CNT (TOTAL COUNT),
you need to remove the battery and reinsert.
5. S (SCAN):
Press the MODE button until the computer shows the flickering S. SCAN mode will automatically
scan each function in the following order: CNT- TMR- TOT. CNT- CAL.
BATTERY:
1. If you have an inaccurate reading on the computer, please replace the battery immediately.
2. The computer use one LR44H battery.
3. The computer is auto-powered. It turns on when exercise begins, and it turns off when no
movement is made between 4 to 5 minutes.
4. All functions will automatically stop calculating when 'STOP' appears in the bottom right corner
of the computer. This occurs when there is no signal for a period of 4 seconds. Once the exercise
begins again, the computer will automatically start recalculating.
Version 2.1
Summary of Contents for SF-S0979
Page 24: ...23 ...
