11
MAINTENANCE & ADJUSTMENT GUIDE
21
13
1
8
ADJUSTING THE STEPPING HEIGHT
Turn the
Adjustment Knob (No. 21)
clockwise
to increase the
stepping height.
Turn the
Adjustment Knob (No. 21)
counter-clockwise
to
decrease the stepping height.
35
15
34
ADJUSTING THE HEIGHT OF HANDLEBAR
Turn the
Adjustment Knob (No. 15)
counter-clockwise
and
pull out it from
Bottom Handlebar Post (No. 34)
. Adjust the
Upper Handlebar Post (No. 35)
to desired position, then
insert and re-tighten the
Adjustment Knob (No. 15)
by turning
it
clockwise
.
CLEANING
The stepper can be cleaned with a soft, clean, and damp cloth. Do not use abrasives or solvents
on plastic parts. Please wipe your perspiration off the stepper after each use. Be careful not get
excessive moisture on the computer display panel as this might cause electrical hazards or
electronics failure.
Please keep the stepper, especially the computer, out of direct sunlight to prevent screen damage.
Please inspect all assembly bolts and pedals on the stepper for proper tightness every week.
STORAGE
Store the stepper in a clean and dry environment, away from children.
NOTES:
Do not use the stepper for more than 15 minutes as the hydraulic cylinders may overheat and
become damaged.
Summary of Contents for SF-S020027
Page 33: ......
