Sunny Health & Fitness SF-RW5639, User Manual

Page: 7 / 21

6
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at
support@sunnyhealthfitness.com
or 1-877-90SUNNY (877-
907-8669).
STEP 1:
Attach
Front Stabilizer (No. 21) to
Seat Rail (No. 3) with 2 Bolts (No.
35), 2 Arc Washers (No. 50), 2
Spring Washers (No. 49), and 2
Nuts (No. 38) . Tighten and secure
with Spanner (No. 52).
Attach the Rear Stabilizer (No. 2) to
the Seat Rail (No. 3) with 3 Inner Hex
Screws (No. 40), 3 Spring Washers
(No. 49), 2 Flat Washers (No. 46) and
1 Arc Washer (No. 50) . Tighten and
secure with Allen Wrench (No. 53) .
STEP 2:
Remove 2
Flat Washers (No. 46), 2
Spacers (No. 14) and 2 Inner Hex
Screws (No. 40) from Long Shaft
(No. 8) with 2 Allen Wrenches (No.
53).
Insert Long Shaft (No. 8) into the
Seat Rail (No. 3) and insert 2
Spacers (No. 14) that were removed
onto the Long Shaft (No. 8) on both
ends. Then, slide the Pedals (No.
15L/R) onto each side of the Long
Shaft (No. 8) . Secure with 2 Flat
Washers (No. 46) and 2 Inner Hex
Screws (No. 40) that were removed.
Tighten and secure with 2 Allen
Wrenches (No. 53) .
Insert the Meter (No. 27) into the
meter support on the Seat Rail (No.
3) . Then, connect the link wire of
Sensor (No. 28) with the link wire of
Meter (No. 27) .