1. FRONT STABILIZER
-
Attach the front stabilizer (52) to the front bottom
of main frame. Insert an M8*72 inner hexagon
screw (51) through an M8 spring washer (17),
M8 arc washer (49) and front stabilizer as well
the main frame. Lock this group tight.
2. REAR STABILIZER
-
Attach the rear stabilizer (74) to the rear bottom
of main frame. Insert an M8*20 carriage screw
(70) through the main frame bottom and the rear
stabilizer; use OD20*ID8.5*2.0T flat waher (15)
and M8 nylon cap (59) to lock the screw on.
3. PEDALS
-
Put the right pedal (93) on the right pedal
support tube (96). Inert them through with
M10*50 carriage screws (27). Then use
OD20*ID10.5*2.0T flat washers (23) and
pedal adjust knobs (26) to lock them tight.
-
Put the left pedal (28) on the left pedal
support tube (30). Insert them through with
M10*50 carriage screws (27). Then use
OD20*ID10.5*2.0T flat washers (23) and
pedal adjust knobs (26) to lock them tight.
27
28
23
26
30
27
93
23
26
96
69
70
70
74
15
59
15
59
15
59
70
69
49
17
51
52
49
17
51