21
EXERCISE METER
FUNCTION BUTTON:
MODE
:
1. Press the button for selection function display value on LCD.
2. Press the button and hold for 2 seconds to reset all values except
odometer to zero.
Note:
When the user replaces batteries, all the values will reset to ZERO
automatically.
OPERATIONS:
AUTO ON/OFF:
The meter will show the workout value automatically as the user begins to
exercise. When the bike has become inactive or without any exercise over 4 minutes, the meter
will turn off and the workout value on the odometer will be held. While the user starts the
exercise
again,
the
workout
value
on
odometer
will
accumulate
continuously.
AUTO SCAN:
After the meter is powered on or the Mode button is pressed, the LCD will display
all function values: TMR-SPD-DIST-CAL-ODO-RPM-PUL (repeat). Every function will
display
for 6 seconds.
FUNCTIONS:
SPD (SPEED):
Displays the current speed being obtained. The range is from 0.0 to 99.9 MPH
(Mile per Hour).
DST (DISTANCE):
Counts the total distance of an exercise from start to finish. The range is
from 0.00 up to 9999 M (Mile).
TMR (TIME):
Counts the total time of an exercise from start to finish. The range is from 00:00
up to 99:59.
CAL (CALORIES):
Counts the total amount of calories burned during an exercise from start to
finish. The range is from 0.0 to 9999 KCAL. (The data is a rough guide which cannot be used in
medical treatment.)
ODO (ODOMETER):
Displays the total amount of distance from the first use. The range is from
0.0 to 9999 M (Mile). User also can press the mode key to display the odometer value.
RPM:
Counts each stroke within a minute. The range is from 0 to 400.
PUL (PULSE):
Displays the user's heart rate in beats per minute during training.
(The data is a rough
guide which cannot be used in medical treatment.)
NOTE
: please put your hands on the hand pulses when in PULSE function.
Note:
1. If the meter display is abnormal, please re-install the batteries and try again.
2. Battery Spec: 1.5V UM-4 or AAA (2PCS).
3. The batteries must be removed from the appliance before it is disposed of safely.
Version 1.3
Summary of Contents for PRO II SF-B1964
Page 4: ...3 EXPLODED DIAGRAM ...
Page 49: ...48 ...
