Sunny Health & Fitness ESSENTIAL INTERACTIVE Series, User Manual

Page: 6 / 16

ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 1:
Attach the Front Stabilizer (No. 2) and
Rear Stabilizer (No. 3) onto the Main
Frame (No. 1) , secure with 4 Carriage
Bolts (No. 6) , 4 Arc Washers (No. 7)
and 4 Domed Nuts (No. 8) by Spanner
(No. 117) .
Note: Ensure that all bolts and washers
are in place and partially threaded in
before completely tightening any of
them.
STEP 2:
A: Connect the Lower Sensor Wire
(No. 16) to the Upper Sensor Wire (No.
15) , and then connect Tension Hook
(No. 17) with Tension Cable (No. 10b)
as shown in Diagram A.
Note: Make sure the Tension
Controller (No. 10a) is at the lowest
level before you connect the Tension
Cable (No. 10b) . This ensures the wires
are at their longest point. We
recommend the assistance of a second
person to help hold the
Handlebar Post
(No. 9) . This will make the connection
easier when you are attaching Tension
Hook (No. 17) to Tension Cable (No.
10b) .
B: Remove the preassembled 4 Allen
Bolts (No. 13) and 4 Arc Washers (No.
14) from the Main Frame (No. 1) . Insert
the Handlebar Post (No. 9) into the
post of the Main Frame (No. 1) ; secure
with 4 Allen Bolts (No. 13) and 4 Arc
Washers (No. 14) that were just
removed with Wrench (No. 118) .
Note : Ensure that all bolts and washers
are in place and partially threaded in
before completely tightening any of
them.