17
RECOVERY MODE
During use, first test your pulse as above mentioned. Then press “RECOVERY” key to enter pulse
recovery function. The display will show 1 minute count-down as well as your pulse rate. Then, it
will pop up your pulse recovery level from F1 to F6, which is from the fastest recovery to slowest.
The fastest recovery F1 shows the best.
WIRELESS PULSE
The computer supports the standard 5.3Khz wearing heart
rate detector.
1. Please wet the two electrodes of the heart rate detector.
2. Wear the heart rate detector on your chest.
FAULT CODE DESCRIPTION
FAULT CODE
POSSIBLE CAUSE
CHECK
SOLUTION
E1
The motor doesn't work.
Check if the motor wires are
plugged in or check if the
motor is stuck.
Pulse in the cable again or
change the motor.
There is something
wrong with the cables.
Check if the cables are
damaged.
Change the cables or plug
in again.
The computer cannot
supply normal voltage to
the motor.
Test whether the voltage of
the motor is normal when
pressing UP and DOWN.
Change the computer.
E2
Hands aren't put on the
two handle pulses
immediately after
pressing START.
Put the hands on the two
handle pulses immediately
after pressing START.
Body Far Function
cannot receive the
signal for pulse.
Check if the pulse is working
when not in Body Fat
program.
Change the computer.
NOTE:
1. This computer uses a 9V/1A power adapter.
2. When the computer is abnormal, please pull out the power plug and re-insert.
3. Without any operation, the computer will enter standby mode after five minutes.
Version 1.1
F1=1.0
BEST STATE
1.0 < F2 <2.0
WELL
2.0 < F3 <2.9
GOOD
3.0 < F4 <3.9
ORDINARY
4.0 < F5 <5.9
Relatively poor
F6=6.0
BAD
RECOVERY
TIMER 60"
