EVERGEN M SERIES USER MANUAL
INSTALLATION
31
Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | [email protected]
Commissioning
Every EverGen EMS must be commissioned using the EverGen Setup App. The app
can be downloaded on most new iPhone and Android devices from the iOS App
Store and the Google Play Store.
Use the signup tab to create an account. A verification email will be sent to the
email address you used to create the account. Open the email and verify your
account. Switch from the signup page to the login page and enter your email
and password. Once inside the EverGen Setup App workspace, enter your order
number (ORDXXXXXX).
You will need internet access to download the order information, but afterwards,
the app can operate without a connection.
Once onsite, follow the steps in the app to connect with each light. Once
connected, commission the light by confirming the system information along with
the operating profile and power output.
The EverGen will then run an internal diagnostics test, then power the light for
one minute.
Repeat this commission process for each EverGen EMS in the project.
