SunMaxx Solar LLC
Page 14 of 39
3.front level bar
、
front support bar and back box installation
5.3 Installation of the tank
Fig 1
Fig 2
Fig 3
Step 1. Screw
off the nuts
from the connection bolts
of the water tank. Take the
water tank out. Put it on the
installed frames slowly and
lightly.
Take care to insert the
bolts of the water tank
into the corresponding
connecting holes of the
tank brackets.
Step 2.
Install the
accessories and turn the
small red cap of the air
vent on the top to
ventilate.
Step 3.
Install the T.P
valve.
5.4 Installation of the heat pipe and vacuum tubes
Open the pack of vacuum tubes and take out one vacuum tube at a time.
a. Install the anti-dust seal on top of vacuum tube.
