Sunmaster Square Root SQRT670CX1, Instruction Manual

Page: 3 / 8

FIXTURE HARDWARE
CONTENTS OF BOX:
(1) Spine with driver
(8) Light Bars
(1) AC power cord (120-277V)
(4) Adjustable mounting hooks
(4) Adjustable mounting cables
5 2
Please read and understand all installation and safety
guidelines before attempting to install or operate this fixture.
• Always adhere to local and national building and
electrical codes
• Do not use this fixture if its power cord is damaged.
Replace the power cord only with original certified power
cords.
• Light bars and power supply are splash-proof but not
waterproof. In the event that the light bar becomes
submersed, first disengage the circuit breaker, followed
by unplugging the fixture
• Disconnect fixture from main power source before
performing any cleaning or repairs
• Do not open or disassemble the fixture as it contains no
serviceable parts. Opening the fixture can be dangerous
and will void the warranty
• Do not operate the fixture near flammable, explosive or
reactive substances.
• Do not clean the under side of the light bars (side with
LEDs) with heavy detergents, rags or sponge.
• Do not touch the under side of the light bars (side with
LEDs)
• Regularly check fixture for dust or dirt build up. Clean if
necessary
• To prevent eye damage, do not look directly at LEDs
when powered
• Allow heat sink surfaces to sufficiently cool before
handling
• This fixture is IP65 rated which is “dust tight” and
protected against low pressure water jets. The fixture
must not be immersed in water
• Do not operate fixture within an ambient temperature of
45°C or higher
SAFETY RECOMMENDATIONS / WARNINGS OPERATIONAL GUIDELINES
• Mount light bars approximately 6” above the top of the plant canopy. This assures
that the maximum amount of light energy reaches and penetrates the plant canopy.
Light diminishes significantly as it is pulled away from the plant canopy.
• Raise the fixture as the plant canopy height increases
• Many plants prefer increased temperatures when exposed to high amounts of light
energy. Therefore, it is encouraged to experiment with increased temperature.
• Regularly check plant growth and health. Consider adjusting water, CO2, relative
humidity, nutrients, and ambient temperature.
CARE
The SQRT670CX1 has been designed for harsh environments and years of
maintenance-free operation. Please maintain your fixture to assure peak operation:
• Assure proper air flow around the fixture, maintaining at least 1” of space between
top of fixture (spine) and the mounting surface or ceiling.
• Remove excess dust, debris and mineral build-up from light bars and spine. Clean
while fixture is unplugged. Use low-pressure air or a rag dampened with water.
• Do not touch the LED array with cloth or hands (show picture of LED array)
NOTE: Fixture to fixture power cord
and fixture-to-fixture control
cable are sold separately
(1) Spine with driver
(8) Light Bars
(1) AC power cord
(120-277V)
(1) Control cable
sold separately
(4) Adjustable
mounting hook
6”
(4) Adjustable
mounting cables