Sunlux XL-9600, Full Manual

Page: 16 / 28

16
Saved and Finished Set
Add Prefix Setting
Steps:
(1) Scan the setting code "Add Prefix setting"
(2) Set the first few digits of the sequence to start inserting characters (including its own data),
use two-digit "data code"
Represents the decimal number XX (the first setting can be omitted, which is equivalent to
setting "0", "1"),
Please check the corresponding data code table
(3) Scan the content that needs to be added in turn, please find the ASCII code table
(4) Finally scan the setting code "Saved and Finished Set".
For example: the original barcode content is "ABCDEFGHIJKLMN";
The content after adding the prefix is ""ABCDE12345FGHIJKLMN"".
1. Scan the setting code "Add prefix"
2. In the original barcode, the prefix "12345" is added before the character ‘F’, while the original
The position of the code content ‘F’ is the 6th character, so the data code "XX" is "0",
"6", search the data code table, and scan the barcode corresponding to the data code in turn.
3. The content added in the original bar code is "12345", a total of 5 characters. Find ASCII
Code table, characters "1", "2", "3", "4", "5", corresponding to ASCII code in turn
"31", "32", "33", "34", "35", and scan the corresponding barcode in turn
4. Finally scan the setting code "Saved and Finished Set".
Remarks: Only operate (1) and (4), you can also clear the content of adding prefix for clearing or
restoring factory.
Add Suffix Setting
Steps:
(1) Scan the setting code "Add Suffix Setting"
(2) Set the penultimate digit to start inserting characters (including its own data), use two-digit
"data code"
Represents the decimal number XX (the last can be omitted to set the same as "0", "1"),
Please check the corresponding data code table
(3) For the content that needs to be added for one scan, please find the ASCII code table
(4) Finally scan the setting code "Saved and Finished Set".
For example: the original barcode content is "ABCDEFGHIJKLMN";
The content after adding the prefix is ""ABCDE12345FGHIJKLMN"".
1. Scan the setting code "Add Suffix Setting"