STEP 8
Front Wall Heaters,
Lights, Stereo,
Control Tablet
K
Right Wall Heaters
Back Wall Heaters
Left Wall Heaters
6
sunlighten.com
5
sunlighten.com
The dust cover should be replaced to protect
the lights and speakers from dust and other
floating residue. Place the heater frames in their
respective locations if you have not yet done so.
As mentioned in STEP 5, there are four
connections to be made in each bottom section of
the walls. If you have not yet done so
,
consult with
the diagram at the bottom of this page.
NOTE: Look at the back of the heater frames for
the “This Side Up” sticker for proper orientation.
After the four floor connections have been made,
please install the bench .
K
Make sure the heater
frames are not mounted, otherwise they will
prevent the bench from resting on the supports.
The large portion of the bench will go in first, on
the back wall support. Last will be the small part
which rests on the cutout of the large bench piece,
as well as the support against the right wall.
There will be two screws to screw into the two
holes on the corner where the two door
thresholds meet.
