5. Interface connections
1
Power input jack.
2
ZONE A temperature probe input jack.
3
ZONE A signal output jack.
4
ZONE B temperature probe input jack.
5
ZONE B signal output jack.
1 2 3 4 5
6. Indicator lights
1
LED ON: Normal status (Temperature
probe is working normally).
LED OFF: Temperature Control line not
connected or temperature control fail.
LED SLOW FLASH: High temperature warning (reached preset value), ballast dimming
down to decrease temperature.
LED FAST FLASH: High temperature, exceeded preset value. Ballast turned off.
2
LED LIGHT ON: Lamp on. LED LIGHT OFF: Lamp off.
3
Same as 1.
4
Same as 2.
1 2 3 4
7. Setting the time
NOTE: Set controller time to your time zone.
1
Press “
t
or
u
”, enter into “SYSTEM SETTING”.
2
Press “
t
or
u
”, to the parameter you want to set
(Time for example: Hour / Minutes).
3
Press “
p
”, “Hour” value will increase,
Press “
q
”, “Hour” value will decrease.
4
Move cursor to set “M”, “D”, “Y”, “Hour”, “Time” or “Power” (W or%).
5
Press “OK”. Time and Date setup is complete.
OPERATIONAL SETUP
4. Keypad operation
Page up or page down
Right shift
Increase parameters
Reduce parameters
Confirm/save
