Thank you for purchasing the Etelligent™ Controller for programming the Sun System
®
1
Etelligent Ballasts with signal ports for on/off/dimming functions. This is a dual zone controller
which can control up to 400 lights (up to 200 in each of 2 zones).
1. Sun System One Controller
This low profile Etelligent Controller is designed to
be paired with Sun System
1
Etelligent Electronic
Ballasts. The Etelligent Controller enables a timed
on/off function, accurate temperature readings,
thermal protection shut off and a timed sunrise/
sunset function.
NOTE: Before connecting to controller, please
make sure the knob is rotated to RC position first.
(1) AC Adapter
(120-240V)
(1) Patch Cord
(2) Control
Cables
For connecting ballast to ballast.
No magnetic ring on cable.
For connecting ballast to controller.
Magnetic rings on cable.
(2) Temperature
Probes
2. Sun System One Controller accessories
3. Connection between ballast and controller
ETELLIGENT
CONTROLLER
ZONE A
(up to 200 ballasts)
ZONE B
(up to 200 ballasts)
The Sun System
®
1 Etelligent
™
Controller Kit #902245, allows wired control of the on/off/dimming capabilities of Sun System
®
1 ballast(s).
Connect the control cable from Zone A signal
output jack to SIG IN on the ballast
Control up to 400 Sun System
®
1 Ballasts with 1 Etelligent
™
Controller
SUN SYSTEM ONE CONTROLLER MANUAL
