XX
S A F E T Y / C A U T I O N S
The cable plug, power switch, socket and
LCd operating plate must be kept dry.
The chiller must be installed by a
skilled technician.
Always use a grounded
power source.
The EcoPlus Chiller muST noT be placed
up-side-down or on a slant, which may
damage the machine. do noT turn on
the machine until twenty minutes after
it has been leveled.
A dedicated socket to the EcoPLus
Chiller is necessary. do noT share
socket with any other appliances.
do noT expose the chiller to direct
sunlight or rain. do noT locate the
chiller on a damp floor or area that
can be easily flooded or splashed by
water or other liquids.
The socket and cable connector must
be able to safely
sustain a current
4 to 5 times higher
than the normal
operating current.
do noT locate chiller near any heat
source, like a boiler, gas stove, etc.
9
do noT connect power before installation
is completed. Always disconnect power
when doing any work on the chiller.
The amount of circulating water must be
in compliance with the data shown in the
technical information table for properly
refrigeration.