Fig.9
:
Insert one end of the small top slanting bar (C3) into the small top connector (A1).
Fig.9-1
:
Place the small canopy (L) on the frame. Screw the finial (B1)onto the tip of the small top connector.
Fig.10
:
Insert the other end of the small top slanting bar (C3) into the slanting bar connector (C4).
Fig.11
:
Fix the assembled gazebo on the ground by using stakes (DD).
FF
Plastic
Loop
52 PCS
Fig.12:
Hang the mosquito netting (N) on the upper tube of the beams H(F,G) using plastic rings(FF).
Hardware Pack 3
