Fig.16:
Settle back card slot 1 (J1) and back card slot 2 (J2) to edge beam and middle beam,
and secure one side of back card slot to edge beam by using bolt (CC) and flat washer (BB).
Fig.16-1:
Fix Back card slot 1 (J1) and Back card slot 2 (J2) with Middle beam (L3) by using bolt (CC) and
flat washer (BB).
Fig.17:
Set the side card slot 1 (N1) and side card slot 2 (N2) to side PC panel, and secure them with
bolt (HH) and flat washer (BB).
Fig.18:
Insert the PC panel 1 (M1) into the slot of middle beam (L3), install the edge beam 1 (L1) and
edge beam 2 (L2) in the same way.
Fig.18-1:
Insert the PC panel (N) into the slot of middle beam (L3), install the edge beam1 (L1)
and edge beam2 (L2) the same way.
Fig.18-2
:
Insert PC panel 1 (M1) into the bottom card slot of middle beam (L3), install edge beam 1 (L1)
and edge beam 2 (L2) the same way.
Fig.19:
Insert the bolt (JJ) into the bottom card slot of middle beam (L3), edge beam
s
, then set the front
card slot 1/2 (K1/K2) to complete bolt (JJ) and insert the front
card slot into the PC panel. Install
front card slot 5(K) the same way, see step 3.
Fig.20:
Install the
Bracket
2 (T2) to edge beam 2 (L2) and front card slot 1/2 (K1/K2), and secure them with
bolt
(
DD)
and flat washer (BB). Same way to install the
Bracket
1 (T1) and
Bracket
3 (T3), see step 3.
CC
Bolt M6X15
12 PCS
BB
Flat washer M6
24 PCS
GG
Bolt M6X35
12 PCS
KK
Nail
Φ
8X250MM
14 PCS
LL
Screw M6*80
8 PCS
Hardware Pack 4
