20 December 2013 7
Fig.13:
Place Roof Panel 1 (E1) on bar 1 (C1) and bar 2 (C2) and secure them with bolt (CC) and washer (BB). Do not tighten
roof panel screws until all panels have been installed and aligned.
Fig.14: Repeat the above step to Roof Panel 2 (E2).
Fig.15:
Place Bar Cover 1 (B) on Bar 1 / Bar 2 (C1/C2) and secure them with bolt (MM) and washer (BB).
Fig.16:
Place Connector Cover (A) on Connector 1 (D) and secure them with bolt (CC) and washer (BB).
Fig.17:
Place Roof Panel 6 (H1) and Roof Panel 7 (H2) on the above assembled bars (J, K2, I1 and I2) and secure them together
with bolt (CC) and washer (BB).
Fig.18:
Place Panel Cover 3 (H3) on the edge of the assembled Roof Panel 7 (H2) and secure them with bolt (CC) and washer
(BB).
