background image

20 December 2013                                                                                               1 

GRILL GAZEBO 

ITM./ART. 966732 

MODEL#L-GG015PCO 

ASSEMBLY INSTRUCTIONS 

 

 

 

 

 

 

 

 

 

IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. 

Please check with your local governing authority / local municipal codes regarding installation of 
structures before assembly.

 

 

 

Tools required (not included): Phillips screwdriver, hammer, 2 ladders that are at least 8.2 ft / 2.4 m in height, cordless 

drill, socket, ratchet set (Metric), socket adapter and socket driver, carpenters’ level. 

 

WARNING: 

 

Check to ensure all parts are present prior to assembly. 

 

This unit is heavy! 5

 adults are needed for safe assembly ---- Never assemble this alone! 

 

 

Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of 

the gazebo construction. 

 

Keep assembly area more than 6 ft /1.8 m from any obstruction such as fence, garage, and house, overhanging branches, 

laundry line or electrical wires.   

 

Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be 

followed to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and 

use.  

 

For outdoor use only. Check all bolts for tightness before use and periodically check and tighten bolts as necessary. 

 

Assemble this unit on firm, level ground or hard surface only. Ensure the unit is level after final assembly. 

 

Protect parts during assembly by laying them on a non-abrasive surface such as blankets or cardboard. 

 

 

IMPORTANT 

Please do not return this product to the store. For technical assistance or replacement parts call Sunjoy from 8:30 AM to 5:30 

PM Eastern Time at the following: 1-866-578-0101 (English, French & Spanish in US) or e-mail: 

[email protected].

 

 

Summary of Contents for L-GG015PCO










Reviews: