7
Step#3
Hardware Pack 3
（
X8
）
JJ
Ф6X180 Stake
（
X 40
）
KK
Plastic Ring
（
X1
）
Touch up paint
Ladder is required.
One person lift the
top center connector (E2) and insert the
assembled top bar 1(B2) into the
longer
tube
of
the
top
center
connector ,as shown in fig.8-1.
Use bolt (FF), extra-big flat washer (CC) and
nut(GG) to fix top bar 2(C2) to screen
connector(F1) and then tighten them, as
shown in fig.9-2
Use bolt (FF),extra-big flat washer (CC)
and nut(GG) to fix short hanging bar(A2)
to triangle enhancement (G1) ,and then
tighten them, as shown in fig.8-2
Insert the end(with spring button ) of the top bar
2(C2) into the top center connector(E2),as
shown in fig.9-1
