5
Insert
post(C1)
into
base
cover(B1) , and then fix post(C1) to
base(A1) by bolt (AA) and extra-big
flat washer(CC),as shown in fig.1
Insert left screen (D1) into right screen(E1).Use
screen connector(F1) to fix the assembled
screens and tighten it by bolt (AA) and extra-big
flat washer(CC),as shown in fig.2
Use bolt (BB) and extra-big flat washer (CC) to
install the assembled screens (D1&E1) onto
post(C1) and tighten them, as shown on fig.3 .
Use triangle enhancement(G1), bolt(BB) and
extra flat washer (CC) to fix post(C1)and
screens(D1&E1),and then tighten them, as
shown in fig.4.
Assemble post supporter (H1) to post (C1) and
screens(D1&E1),and then use bolt (AA) and extra-bit
flat washer to tighten them, as show in fig.5.
