Hardware Pack 3
AA
M6X15 Screw
14 PCS
BB
M6 Flat washer
16 PCS
HH
M6X
60
Bolt
2 PCS
Fig.16: Insert the PC piece
(M6/M7) into the rail on the
small slanted beam (U).
Fig.17: Insert the Brace 4 / Brace 5 (O1 and
O2) into the lower of the PC piece 6/7 (M6
and M7), then secure the corner plate (Q2)
to the small slanted beam (U) through three
holes with screws (AA) and flat washers
(BB).
Fig.18: Secure the cover (T) to the
small top connector (S) with bolts
(
HH
) and flat washers (BB)
Fig.19: Insert the PC piece 3/4
(M3/M4) into the middle beam
(K1/K2) and slanted beam (J),
then insert the rails (P1/P2)
into it. Insert the PC piece 1/2
(M1/M2) into the middle beam
(K1/K2) and slanted beam (J).
Repeat this step to install the
right roof pieces.
Fig.20: Insert the PC
piece 5 (M5) into the
middle beam 2 (K2);
then insert the middle
rail (P3) into it. Insert the
PC piece (M5) into the
middle beam 2 (K2).
Fig.21: Insert the Brace
1/2/3 (N1, N2 and N3) into
the lower of PC pieces; then
secure the center plate (Q1)
to the middle beam 2 (K2)
through three holes with
screws
(AA)
and
flat
washers (BB).
Fig.22:
Secure
the
corner plate (Q2) to
the slanted beam (J)
through three holes
with screws (AA) and
flat washers (BB).
