background image

1. Keep all children and pets away from assembly area. Children and pets should be 

supervised while gazebo is being assembled.   

2. The assembled gazebo should be located at least 6 feet (2 m) from any obstruction such as 

a fence, garage, and house, overhanging branches, laundry lines or electrical wires.   

3. This unit is heavy. Do not assemble this item alone. Six people are recommended for safe 

assembly.   

4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.   

5. When assembling and using this product, basic safety precautions should always be 

followed to reduce the risk of personal injury and damage to equipment. Please read all 

instructions before assembly and use.   

6. For outdoor use only. Install on level ground. 16 stakes are provided to secure the gazebo in 

the ground. If you wish to secure the pavilion to a  wood deck or concrete surface, use 16 

anchors suited for these surfaces (anchors not included).   

7. Check all bolts for tightness before and during usage.   

8. Please check your state and local regulations prior to purchasing. Some jurisdictions may 

require permits for installation and use. Some special procedures may be valid in your area.   

9. While this gazebo is manufactured to withstand strong force winds through only the supplied 

ground stakes, securing the gazebo to a deck, concrete patio or a stronger base, in areas 

subject to frequent severe weather should be considered.   

NOTE

:  The gazebo’s roof and structure are not guaranteed against extreme weather 

conditions (storms, high winds, etc.). If the gazebo is not dismantled for the winter, snow must 

be  cleaned off regularly. Any damage caused by snow accumulation is not covered by the 

warranty.   

 

Limited Warranty:

   

This limited warranty is extended to the original purchaser and applies to defects in materials 

and workmanship of your item provided the item is maintained with care and used only for 

personal, residential purposes.   

 

The item is warranted to be free from defects in material or workmanship for a period of 

one (1) 

year

. We don't reimburse for transportation or delivery costs, or compensate the individual or 

any outside party for assembling or disassembling the product. 

Items used for commercial, contract, or other non-residential purposes, or items damaged due 

to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or 

rusting of hardware is not covered.   Proof of purchase (dated register receipt) is required for 

warranty claims. Warranty is to the original purchaser and is non-transferable. Any 

replacement of warranted items will be in the original style and color, or a similar style and 

color if the original is unavailable or has been discontinued. As some states do not allow 

exclusions or limitations on an implied warranty, the above exclusions and limitations may not 

apply. This warranty gives you specific rights, and you may also have other rights, which vary 

from state to state.   

 

Exclusions:

   

Maintenance: 

 

Summary of Contents for D-GZ841PST-C












Reviews: