15
2. Clean the nozzle with the needle clean-out tool provided
(Fig. 27). Remove the stainless steel lance from the gun;
remove any dirt from the nozzle hole and rinse.
3.
Remove additional debris by back flushing water through
the nozzle and stainless steel lance. To do this, place the
end of your garden hose (with water running) to the tip
of the nozzle, pushing water and debris out of the back
opening of the nozzle and stainless steel lance.
Disposal
Recycling the Washer
•
Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
•
Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
•
When replacing old appliances with new ones, the retailer
is legally obligated to take back your old appliance for
disposal at least free of charge.
S Support
If your Sun Joe
®
SPX3000-XT-RM electric pressure washer
requires service or maintenance, please call the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE (1-866-
766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Fig. 25
Pre-filter
Fig. 26
Inlet filter
15º
Fig. 27
Needle clean-out tool
Record the following numbers from the housing or handle of your
new product:
S P X 3 0 0 0 - X T - R M
Model #:
Serial #:
Summary of Contents for SPX3000-XT-RM
Page 18: ...18 NOTES ...
Page 20: ...sunjoe com ...
