8
outlet to start charging (Fig. 6).
2. The charge indicator LED on the charger will illuminate red
to indicate that the charging is in progress.
3. The battery will take approximately 1.5 hours to charge.
The charge indicator LED will become green when the
battery is fully charged, unplug the charger immediately
when the green light is on.
m
CAUTION!
This charger does not automatically turn off
when the battery is fully charged. Please take care not to leave
the pressure washer plugged into the charger. Switch off or
unplug the charger at the mains when charging is complete.
The charging process starts as soon as the charger is plugged
into both the proper electrical outlet and the tool.
• During the charging procedure, the housing of the tool will
feel slightly warm to the touch. This is normal.
• When no further use is planned for an extended period of
time, disconnect the battery charger from the outlet and the
unit.
• Do not use the tool during the charging procedure.
Operation
Connect to Water Supply
1. Connect the garden hose adapter (female coupler) to the
water inlet of the pressure washer, then thread your garden
hose (male end) into the garden hose adapter (Figs. 7 – 8).
The garden hose must have an internal diameter of at least
13 mm (1/2 in.) and must be reinforced. The water supply
must be at least equal to the washer delivery capacity.
NOTE: The machine is not suitable for connection to
the potable water main.
2. Attach garden hose to water supply (Fig. 9).
m
WARNING!
Do not connect to potable water system.
m
WARNING!
If connection is made to a potable water
system, the system shall be protected against backflow
R
Fig. 6
Battery charger
Charging socket
Charge
indicator LED
m
IMPORTANT!
To maintain optimal charge levels, you must recharge the
device within 30 minutes of use.
Fig. 7
Water inlet
Garden hose
adapter
This end to
water inlet
Garden hose
(male end)
Fig. 8
Garden hose
Fig. 9
Connect to water supply
Garden hose
