background image

10

Attach the thatch collection bag to the lawn sca 

dethatcher before operation.

1.

 

Lift the ejector flap, and hang the thatch collection bag to 

the mounting hooks (Fig. 7).

Re Emptying the Thatch 

Collection Bag

Empty the thatch collection bag frequently during use. Do not 
wait until it is completely full. We recommend emptying it when  
it is half full.

1.

 

Lift the ejector flap and pull the thatch collection bag off 

the mounting hooks to remove it.

2.

  Empty the bag's contents into a suitable waste receptacle. 

Mount the bag back into position before resuming work.

Intended Use

1.

  This sca dethatcher is designated with a 12 amp 

motor. Depending on the fitted cutting device, this 

machine is either intended for scarifying and removing 
thatch from lawns or raking in domestic and hobby 
gardens.

2.

  When used as a scarifier, this machine works by 

scratching through and between the grass with specially 
adapted prongs that collect and remove any unwanted 
parts from the lawn while leaving the grass blades intact. 

At the same time the machine scarifies the ground 

resulting in a better aeration.

3.

  When used as a dethatcher the fine needles will scratch the 

surface of the lawn while simultaneously picking up light 

debris for better oxygen absorption, airing and drainage.

4.

  This machine is not to be used in wet weather conditions 

and may not be used to mow dry, wet or unusually high 

grass, e.g., pasture grass or for shredding leaves.

5.

  This machine is intended for private domestic use only, 

not for any commercial trade use. It must not be used for 
any purposes other than those described.

Operation

Cutting Depth Adjustment

m

WARNING!

 

The unit must be switched off and 

disconnected from the power supply before adjusting the  
tine settings.

Adjust the depth according to the needs of your lawn. The 
most suitable depth depends on the kind of lawn and the 
actual height of the grass.

1.

 

Pull the depth adjustment lever away from the wheel, then 

move it forward or backward to adjust the cutting depth 
(Fig. 8).

2.

  Adjust the lever to one out of the four stages. Read the 

adjusted depth from the scale. 

Power Connection

Push a loop of the extension cord through the slot on the 

switch box from the opposite side of the switch box (Fig. 9). 
Insert the appliance cord into a proper outdoor extension cord 
(see Extension Cord Chart on page 3).

R

Mounting hook

Fig. 7

Ejector flap

R

R

Fig. 8

Depth adjustment 
lever

Pull out

Adjust

Minimal

For raking healthy lawn. Do not 
use for scarifying.

Middle

For transport, storage, scarifying 

and raking.

Deep

Deep

Setting

Depth

Application

5 mm

0 mm

-5 mm

-10 mm

For scarifying, not 

recommended for raking.

For scarifying, do not use 

 

for raking.

Summary of Contents for AJ798E-RM





















Reviews: