9
2.
Secure the two middle handle bars to the lower handle
bars
using the first set of knobs and bolts. Tighten the
knobs on each side to ensure a secure fit
(Fig. 3).
3.
Slide the switch box on the left side of the upper handle
frame until it clicks and locks in position (Fig. 4).
4.
Connect the upper handle frame to the middle handle
bars using the second set of knobs and bolts. Tighten the
knobs on each side to ensure a secure fit (Fig. 5).
5.
Fix the cord with cord clips to the middle and lower
handle bars (Fig. 6).
Thatch Collection Bag Assembly
m
WARNING!
Do not attempt to use the product without
the thatch collection bag attached. This could pose a danger
of flying debris.
m
WARNING!
The product must be switched off and the
cutting device must have stopped rotating before you attach or
empty the thatch collection bag.
m
WARNING!
Never use the scarifier without the thatch
collection bag securely fitted.
NOTE:
A full thatch collection bag will reduce the performance
of this product.
Fig. 2
Phillips screws
Fig. 3
Lower handle
bars
Middle
handle
bars
Lower handle
knob + bolt
Switch
box
Fig. 4
Upper handle
frame
Fig. 5
Middle handle
bars
Upper handle
knob + bolt
Upper handle
frame
Fig. 6
Cable clips
