- 11 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
Wall Mount
The plastic Wall Mount kit is optional and available upon request. Follow the
steps below to install the Hub with the wall mounting plate.
1.
To remove the DIN-Rail clip from the Hub, loosen the screws from the DIN
Rail clip.
2.
Place the wall mounting plate on the rear panel of the Hub.
3.
Use the screws to tighten the wall mounting plate onto the Hub.
4.
Use the hook holes at the corners of the wall mounting plate to hang the
Hub onto the wall.
5.
To remove the wall mounting plate, reverse the steps above.
Note:
Wall Mount Kit is a optional accessory does not include in the standard
packing. If any accessory requests, please contact your vendor for detail.
Hook space to hold
pin/screw at wall
Holes for Screw to fix wall
mount brackets
1
2
