43
7.3 Safeguard the quality of LCD
Turning to the issue of the screen, the temperature is an important part. Good
after the end of the working procedures, routine work is shut down the UMPC
power supply, close lid. However, all types of displays and UMPC components are
internal heat, you close the lid, and the screen will not be able to distribute the
heat. So please cultivate the habit: Let the lid open about 10 minutes to allow heat
dissipation.
You should also use the UMPC power management functions to the system for a
period of time when no power and shut down LCD screen, and can also install a
screen saver.
Please follow the general safety precautions to learn how to clean the UMPC.
7.4 Maintain hard drives
Information is lost as the result of the system. Users must cultivate a certain time
every week or on the maintenance of the habit of hard drives. The following is that
you can carry out maintenance work:
• Backup hard drives information.
Install anti-virus procedures, and surveillance files will be destroyed by virus
activities.
• Occasional use of SCAN DISK, correction directory and the file allocation table
any errors. This can never be the use of the space sector.
• plot access to the hard drive, or do not hold mobile UMPC, is not particularly
shocked the UMPC, otherwise it may damage the drive.
• Use hard disk drives maintenance procedures, such as Windows disk
reorganization procedures, which can be separated to eliminate the state
archives, reorganization hard disk drives, hard drives to shorten the access time.
• Set in the UMPC system passwords, so that others are not able to use your
UMPC.
7.5 Battery maintenance & attention
The UMPC attached to the battery requires proper maintenance and processing,
in order to ensure effective operation and the longest life. If the battery is not
handled properly, there are chemical burns or fire hazards.
To ensure that the battery with a normal life, dealing with batteries, please pay
attention to the following matters:
Careful with batteries, do not try to decomposition, crushing, burrows, open,
falling, damage, short-circuit, fire or under water, or more than 60 ℃ exposed to
the environment.
