13
lithium batteries are more fragile than nickel-metal hydride batteries, so please do
not use other transformer rechargeable lithium batteries action, or else they may
combustion or explosion。
Install battery
These UMPC batteries provide the most convenient installation methods. You can
be part of processes can be inserted into the battery slot at the battery.
Remove the battery
To remove the battery, keep fixed to the left &right hold button down, and at the
same time removing both the buttons on the opposite side to pick the battery.
Replacement batteries
When your UMPC estimates only remaining minutes of battery power, LED status
panel on the battery icon will be flashing, and a shortage of electricity Bleep
beeps to remind you the power shortage. If you use a sound system, hard disk will
consume a lot of electricity, your UMPC power than that expected by the time you
faster depletion. You must insufficient power transformer will be connected to
your UMPC, or your UMPC and data storage to idle drives. Otherwise UMPC will
automatically enter idle drives and data storage to Close. Unless you connect or
power transformer has been installed on rechargeable batteries, it can not be
re-activated UMPC. To install batteries, please refer to the above sections of
"battery" and "Remove the battery.
For Windows 2000/XP, Idle Mode (Hibernate (dormant) or Standby (standby)) in
the Windows Control Panel Power Options settings)
In your replacement battery or connect transformers, has been determined to
save your information, otherwise it will cause data loss.
Battery
HOLD
HOLD
