15
2.3 Activate your UMPC
·
Power Activation (Power) button at the top of the base. Press the power button
activated your UMPC and check whether the power supply turn on the lights.
·
After a few seconds, the UMPC will turn on the screen; the UMPC will begin the
implementation of activated self-test (Power on Self Test or POST) examination of
all system components are working properly. In the course of testing found no
errors, will be displayed on the screen and may issue short beeps.
·
Self-test, the screen will display the message "press <DEL> to RUN SETUP." At
this point you need to perform this procedure, because your dealer has to
complete the necessary settings. The other additional settings please wait
reference to Chapter VI, and to implement SETUP program.
·
After the test is completed, the UMPC will begin the search for hard disk
activated by the operating system. The UMPC are usually in the drive, the
Windows operating system pre-installed. Please refer to the use of the Windows
operating system manual to understand how to use it, or contact dealers for
assistance.
2.4 Adjust screen control
LCD screen brightness can be <F6> <FN> + / + <F7> <FN> bond to be adjusted.
You must be in your UMPC activated after further adjustments to obtain the best
effect.
·
If TFT color screen brightness adjustment can only use hotkeys.
Hotkey adjustable brightness of the LCD screens brightness. Hot Keys screen
brightness can not be adjusted for the whole white or black, it can provide
adequate LCD screen with brightness to the brightness of the external
environment. In the bright room, you must increase the brightness of the LCD
screen.
2.5 Turn off the UMPC
If you have a period of time will not use the UMPC, it is advisable to power down
