57
9.4
Entering Password
MV Station parameters are protected by password. User can enter into the “Set-
parameter” sub-menu only after entering the correct password. Proceed as follows to
enter the password:
step 1
Tap “Function” from the default menu.
step 2
Tap “Set-parameter” and the password entering window pops up.
step 3
Tap the white edit box and a keypad pops up.
step 4
Enter the password 1111 through the keypad.
If the entered password is correct, the parameter setting page pops up, and the user
can set system parameters, running parameters, protection parameters, and
communication parameters.
B
Bu
utttto
on
n
F
Fu
un
nc
cttiio
on
n
←
Backspace key, delete the digit input
Clr
Clear the digitals input
Esc
Escape and close the keypad
Enter
Confirm the password entered
Max./Min.
The maximum and minimum value can be input; digital outside
this range is invalid
If the input password is 1111, user can enter into the normal parameter setting page
and set the system parameters, running parameters, protection parameters and
communication parameters.
step 5
Press “Enter” to confirm the password entered.
step 6
If the password is incorrect, an “Error password” window will appear. Tap “Enter”
and re-enter the password.
System Manual
Summary of Contents for SG4950HV-MV
Page 2: ......
