manualshive.com logo in svg

Sungrow SG3KTL-EC, User Manual

Share
Download
Sungrow SG3KTL-EC User Manual Download Page 95

User Manual 

 

 

 

 

 

      11 Viewing PV Plant Information 

  

85

 

 

3.

 

Wait for about 10 minutes and the icon as shown in the figure below will 
appear on the main LCD display interface. The SolarInfo Bank connects to the 
inverter successfully. 

 

4.

 

(Optional)

 Do this step only for scenario 2. Proceed as follows to configure 

the IP address and subnet mask of the computer. 

−

 

  For Windows 7 or higher version, right click the [Network and Internet] icon 

on the right corner of the desktop, click [Network and Sharing Center], open 
[Local Area Connection], click [Properties], double click [Internet Protocol 
Version 4 (TCP/IPv4)], click [Use the following IP address].   

−

 

For Windows XP, right click [My Network Places], open [Local Area Connection], 

click [Properties], and double click [Internet Protocol (TCP/IP), and then click 
[Use the following IP address].

   

Summary of Contents for SG3KTL-EC
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands