Sungrow Logger3000, User Manual

Page: 50 / 90

44
-- -- E En nd d
9.8.2 Firmware Update
The firmware update function is used to upgrade the SUNGROW residential inverter and
string inverter.
step 1 Click "Device" -> "Firmware update" to enter the corresponding interface.
step 2 Click the button "Select a firmware file". Select an upgrading file and import it to the
system. Matching inverters will be detected.
step 3 Select the device to be upgraded, and click “Upgrade”.
step 4 Complete firmware update to view current version, target version, start time, end time
and other information.
-- -- E En nd d
The firmware file should be in the ".sgu" format.
9.8.3 Inverter Log
step 1 Click "Device" -> "Inverter log" to enter the corresponding interface.
step 2 Select the device running information, and click the button to view the export
progress.
step 3 Click "Save" to store the exported log in the local.
step 4 Click "Cancel" and then "Confirm" on the pop-up window, to cancel the current
operation.
-- -- E En nd d
9.9 History Data
Click "History data" -> "Operation logbook" to enter the corresponding interface.
On this interface, users can view history information.
9.10 System
9.10.1 Running Information
Click "System" -> "Run-info" to enter the corresponding interface.
Information such as mobile network signal strength, AI voltage, DI status can be viewed.
9.10.2 System upgrade
Users can upgrade Logger3000 on the Web interface.
9 Web Interface User Manual