SunFounder Thales Kit Manual Download Page 166

Page: 166 / 167

SunFounder Thales Kit for Raspberry Pi Pico, Release 1.0

5.2 Q2: Cannot open Pico code or save code to Pico via Thonny IDE?

• Check that your Pico is plugged into your computer via a USB cable.

• Check that you have selected the Interpreter as

MicroPython (Raspberry Pi Pico)

5.3 Q3: Can Raspberry Pi Pico be used on Thonny and Arduino at

the same time?

NO, you need to do some different operations.

• If you used it on Arduino first, and now you want to use it on Thonny IDE, you need to

Installing MicroPython

on it.

• If you used it on Thonny first and now you want to use it on Arduino IDE, you need to

Setup the Raspberry Pi

Pico

5.4 Q4: Code upload failed in Arduino IDE?

• Make sure you have installed the Pico board in the Arduino IDE.

• Check that the Board(Raspberry Pi Pico) or portCOMxx (Raspberry Pi Pico)is selected correctly.

• Make sure you have plugged the Pico into your computer.

• If only COMxx (The complete one should be COMxx (Raspberry Pi Pico)) is displayed, it means that Pico is

not correctly recognized by the computer. You need to refer to steps 5, 6, and 7 in

Setup the Raspberry Pi Pico

162

Chapter 5. FAQ

Summary of Contents for Thales Kit








































































































































































Search results

Summary of Contents for Thales Kit

Reviews:

Related manuals for Thales Kit

Brands by name

Popular brands

SunFounder Thales Kit, Manual

Search results

Summary of Contents for Thales Kit

Reviews:

Related manuals for Thales Kit

Brands by name

Popular brands