2
function setting.
FIGURE 3
SD CARD INSTALLATION
Once the unit is powered up, if no SD card is found, a
beep sound will be played for 10 seconds every hour.
For security reasons, the 2GB SD card is sealed in the
unit. There is no need to take it out it is needed or to
upgrade it with a larger capacity SD card (up to 32GB).
Note:
Make sure the unit is powered OFF before
inserting or removing SD cards. If the unit is not
powered off, press ‘
SET’
to enter scene mode and then
press ‘
Up’
or ‘
Down’
to choose Scene 4. After the
unit is set to Scene 4, insert or remove the SD card
accordingly. To insert an SD card:
(1) To
open the SD card cover, i
nsert the wrench
provided in the screw pack and turn 3-5 times
counterclockwise. The cover will slide down (the
screw will stay in place to avoid losing it)
(FIGURE
4).
FIGURE 4
(2) Insert SD card into the card slot (FIGURE 5).
FIGURE 5
(3) Refit the cover, and fasten the screw clockwise
(FIGURE 6).
1
2
FIGURE 6
(4) Once the unit is powered up, it will detect the
existence of a ‘LIGHT’ folder. All recorded files
will be saved in this folder. If the folder isn’t found,
the SD card will be formatted while a ‘LIGHT’ folder
will be generated.
(5) Once a video recording is taken, it will be saved
in
.asf
format
under
the
path
LIGHT\YMD\time+serial no.asf
. Below is an
example of a self generated file name:
17075600
Note:
Oldest videos are deleted and overwritten as the
card reaches capacity to ensure recent events are
always available.
BULB INSTALLATION
CAUTION
: Always handle quartz halogen bulb with a
soft cloth. Do not touch the bulb with your bare hands
as it will shorten the bulb life.
(1) Do not touch the light while it is in use or still hot
Allow it to cool off (about 5 minutes) before
touching it
(2) Do not use halogen bulb rated higher than 60 watts
for each lamp
(3) Disconnect the power cord or wall switch
(4) Turn the lampshade counterclockwise to remove it
FIGURE 7).
FIGURE 7
(5) Install a G9 halogen bulb to its lamp holder
(FIGURE 8a).
FIGURE 8a & 8b
Hour
Minute Seconds Serial No.
