7
Note:
The LUX setting range is between 20 LUX to 200
LUX.
FIGURE 31
CHOOSING A MOUNTING LOCATION
For best results affix the unit on a solid surface, 2 -
2.5m (6.5 – 8 feet) above the ground
Avoid aiming the unit at pools, heating vents, air
conditioners, or other objects which change in
temperature rapidly
Sunlight falling directly on the front of the unit may
affect video quality. It is recommended to test the
location prior to installation.
Try to avoid pointing the unit at trees, shrubs or
where the motion of pets may often be detected
The motion sensor is more sensitive to objects
moving across its field of view. It is less sensitive
to an object moving directly towards the sensor
head. (FIGURE 32).
MORE SENSITIVE
SENSOR
LESS SENSITIVE
SENSOR
FIGURE 32
SAFETY PRECAUTIONS
Do not install the Motion Activated Dual Light &
Video Camera when it is raining
Be sure to switch
off
power source before
installing
To avoid fire or burning hazards; allow fixture to
cool before touching. The bulb and the fixture
operate at high temperatures
When mounting on the wall, the unit must be
installed vertically (FIGURE 33a), not horizontally
(FIGURE 33b).
VERTICAL HORIZONTAL
FIGURE 33a & 33b
IMPORTANT
Installation must be performed by skilled technicians
who are aware about the standards and technical
requirements of the appliance and its proper
installation.
Check your local codes as they apply to your
situation. If the house wiring is aluminum, consult
with an electrician about proper wiring methods.
Before proceeding with the installation,
TURN OFF
THE POWER TO THE LIGHTING CIRCUIT AT THE
CIRCUIT BREAKER OR FUSE BOX TO AVOID
ELECTRICAL SHOCK.
INSTALLATION
A drill and a screwdriver are needed for installation.
Select a location for the unit based on the coverage
angles as shown in FIGURE 34.
TOP VIEW
0
12
2
4
8
4
0
12
8
8
4
SIDE VIEW
12
UNIT:m
11
0°
FIGURE 34
Install a wall switch adjacent to the power source.
(FIGURE 35). This will help you operate the unit with
ease.
N
L
WALL
SWITCH
AC
POWER
FIGURE 35
WIRING INSTRUCTIONS
American Version
(1) Switch off the power source or wall switch
(2) Line up the holes on the mounting bracket with the
holes on your junction box. Using fitting screws
(depending on size of the holes in your junction
box), and attach the mounting bracket to your
junction box (FIGURE 36).
