http://www.sunflower
‐
solar.com/
Version
11.03
Subjec
tto c
hange 2011
SUNF
LOWER SOLAR
8
Note:
"Do not tighten the bolts completely. Just make them snug. You may need to turn the tank so that the
vacuum tubes line up with the bottom tube holders. Once the tubes are installed, then tighten the bolts
completely so the tank is firmly connected to the stand."
Fig 3.5
3.4
All-glass vacuum tube Assembly
1)
Put the Decoration ring on the opening part of the SFVA .Daub some lubricant referred in the above item on the
opening part of the SFVA tube.
Fig 3.6
2)
Insert SFVA into one of the water tank's holes for evacuated tubes.
Please make sure the opening part of the SFVA tube also insert into the Seal Silicon ring and it's easily to insert
if in the way of going round and slowly.
