background image

User's Manual

23

Limited Warranty

Sun

Þ

 re Corporation is proud of its 

prod ucts which have been built with care 
using ad vanced technology and premium 
com po nent parts. Your unit has been 
crafted to perform properly for many 
years. Sun

Þ

 re Corporation offers the 

following Warranty to you, the owner of a 
new Sun

Þ

 re product:

The Sun

Þ

 re Corporation Warranty 

for the True Subwoofer EQ Solitaire is 
in effect for TWO years from the date 
of original retail pur chase. The Sun

Þ

 re 

Cor po ra tion War ran ty covers defects in 
materials and work man ship. The follow-
ing, however, are excluded: 

a)    Damage caused during shipment.
b)    Damage caused by accident, mis-

 use, abuse of op er a tion contrary 
to the in struc tions speci

Þ

 ed in the 

Sun

Þ

 re Cor po ra tion user’s manual

c)    Units where the serial number 

has been defaced, modi

Þ

 ed or 

removed,

d)    Damage re sult ing from mod i 

Þ

  ca tion 

or attempted repair by any person 
not authorized in writing by Sun

Þ

 re 

Cor po ra tion.

e)    Units purchased from unauthorized 

dealers.

The Sun

Þ

 re Corporation Warranty ex-

tends to the original owner or subsequent 
owner(s) during the two year warranty 
period so long as the original dated 
pur chase receipt is pre sent ed whenever 
warranty service is required.

All implied warranties, including war-

 ran ties or merchantability and 

Þ

 tness 

for par tic u lar purposes, are limited in 
duration to the two year length of this 
Warranty, unless otherwise provided by 
state law.

Sun

Þ

 re Corporation’s liability is limited 

to the repair or replacement, at our op-
tion, of any defective product and shall 
not in any event include property or any 
other in ci den tal or consequential dam-
ages which may result from the failure of 
this product.

Some states do not allow limitations on 

how long an implied warranty lasts and/or 
do not allow the exclusion or limitation of 
in ci den tal or con se quen tial damages, so 
the above lim i ta tions or exclusions may not 
apply to you.

This Warranty gives you speci

Þ

 c legal 

rights, and you may also have other 
rights which vary from state to state. We 
suggest that you attach your purchase 
receipt to this War ran ty and keep these in 
a safe place. Thank you for your choice 
of a Sun

Þ

 re Cor po ra tion product.

Service Assistance

We suggest that you read the Limited 

War ran ty completely to fully un der stand 
your Warranty/Service coverage.

If your Sun

Þ

 re Corporation product ever 

requires service, write to us, or call:          

       Sun

Þ

 re Corporation                            

       Technical Services De part ment         
       P.O. Box 1589                                    
       Snohomish, WA 98290                      
       Tel  (425) 335-4748                            
       Fax (425) 335-4746

You will be directed to an authorized 

Sun

Þ

 re Corporation Service Station or 

receive instructions to ship the unit to the 
factory. Please save the original shipping 
carton and packing materials in case 
ship ping is required. Always use the origi-
nal cloth bag and packaging materials 
and method, or the 

Þ

 nish may be dam-

aged. Please do not ship Parcel Post.

      NOTE:

 Before sending in your unit for     

      repair, you must call Sun

Þ

 re for return     

      authorization.

Include a complete de scrip tion of the 

problem, in di cat ing how you have it 
con nect ed, the associated equipment in 
your system and a copy of your purchase 
receipt. Initial shipping costs are not paid 
by Sun

Þ

 re Corporation; return ground 

shipping costs will be prepaid if repairs 
were covered by the scope of this War-
ranty.

Summary of Contents for Solitaire 12

























Reviews: