Thermal Imaging Integrated Network Camera
User Manual
Parameter Setting
Issue V1.1
（
2022-05-21
）
55
Figure 6-3
Mode interface
Operation Procedure
Step 1
Click
in the lower left corner of Sensor Setting, and choose
Debug
Mode
.
Step 2
Choose switch mode form drop-down list.
Step 3
Set the Start Time
Step 4
Set the End Time
Step 5
Click
Save
, the message "Save succeed" is displayed, the system saves the settings.
----End
6.3
Images
Figure 6-4 shows the
Image
interface.
