Bi-Spectrum Radiometric Detector
User Manual
Quick Configuration
Issue V1.0 (2019-10-08)
39
Figure 4-15
Thermal mapping interface
Step 2
Settings please refer to Table 4-6.
Table 4-6
Parameter of thermal mapping
Parameter
Description
Setting
Zoom in /zoom out.
[Setting method]
Click the button
Near focus / far focus.
[Setting method]
Click the button
Lock focus
position
N/A
[Setting method]
Tick .
Mapping point
You need map three points at
two channels. Points are
correspond of each.
The three points should cover
most areas, and two points are
located in the diagonal display
of the picture.
Point one is green cross.
Point two is red cross.
Point three is blue cross.
[Setting method]
Select from drop list.
Step 3
Click
Apply
. The message "
Apply success
" is displayed, the system saves the
settings.
