Bi-Spectrum Radiometric Detector
User Manual
Quick Configuration
34
Issue V1.0 (2019-10-08)
Figure 4-11
Temperature area and alarm configuration
Step 2
Set the parameters according to Table 4-5
Table 4-5
Temperature area and alarm configuration
Parameter
Description
Setting
Channel
N/A
[Setting method]
Select a value from the
drop-down list box.
[Default value]
1
Measure Mode
Set at temperature parameter
interface.
N/A
Enable
Tick to enable the areas
N/A
ID
It ranges from 0 to 19
N/A
Name
Area name of temperature area.
[Setting method]
Enter a value manually.
Type
Type of temperature area.
ID 0 is default rectangle area,
which is full screen.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Rectangle/Point